Comandi per telecamera wanscam HW0045

by salvatore.crapanzano

VIDEO

rtsp://admin:instar@IP-Address:RTSP-Port/11 :: VLC Stream

http://admin:instar@IP-Address:Port/iphone/11 :: Quicktime Stream

http://IP-Address:Port/tmpfs/snap.jpg?usr=admin&pwd=instar :: Snapshot (720p / 1280×720 Pixel)

http://IP-Address:Port/tmpfs/auto.jpg?usr=admin&pwd=instar :: Snapshot (352p or 176p)

http://IP-Address:Port/cgi-bin/hi3510/mjpegstream.cgi?-chn=11&-usr=admin&-pwd=instar :: MJPEG Stream
also note the additional SDK documentation for accessing video / audio

PTZ

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=right :: Moves continuously right

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=left :: Moves continuously left

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=up :: Moves continuously up

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=down :: Moves continuously down

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=stop :: Stops moving camera-head

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=right :: Moves one step right

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=left :: Moves one step left

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=up :: Moves one step up

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=1&-act=down :: Moves one step down

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=home :: Go to Center Position

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=hscan :: Scan horizontal

http://IP-Address:Port/cgi-bin/hi3510/ptzctrl.cgi?-step=0&-act=vscan :: Scan vertical

http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=1&-number=[0-7] :: set a position

http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=set&-status=0&-number=[0-7] :: unset a position

http://IP-Address:Port/cgi-bin/hi3510/preset.cgi?-act=goto&-status=1&-number=[0-7] :: goto to a set position

IMAGE

http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr :: Sets the Image Parameter
You can set the following parameters:

brightness :: [0 – 255] the bigger the value the brighter the image

saturation :: [0 – 255] the bigger the value the more saturation the image has

contrast :: [0 – 255] the bigger the value the more contrast the image has

hue :: [0 – 127] the bigger the value the more hue the image has

flip :: (on , off) flips the image

mirror :: (on , off) flips the image

scene :: (auto , indoor , outdoor) sets the white balance mode
http://IP-Address:Port/cgi-bin/hi3510/param.cgi?cmd=setimageattr&-brightness=0&-saturation=0&-contrast=0&-hue=0&-flip=off&-mirror=off&-scene=auto

WLAN

reset the parameter values

http://192.168.xxx.xxx./cgi-bin/hi3510/param.cgi?cmd=setwirelessattr&-wf_ssid=SSID&-wf_enable=0&-wf_auth=2&-wf_key=1234&-wf_enc=1&-wf_mode=0

IR-LED

http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=auto :: Sets IR LED’s to auto mode

http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=open :: Sets IR LED’s always active :: only IN-6011

http://192.168.178.87/cgi-bin/hi3510/param.cgi?cmd=setinfrared&-infraredstat=close :: Sets IR LED’s always inactive

ALARM

http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=1&-name=1 :: enables the md area 1

http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=0&-name=1 :: disables the md area 1

http://192.168.x.x/cgi-bin/hi3510/param.cgi?cmd=setioattr&-io_enable=1&-io_flag=1 :: enable / disable external alarm in to trigger recording
http://admin:instar@192.168.xxx.xxx/cgi-bin/hi3510/param.cgi?cmd=setmdattr&-enable=0&-name=1&cmd=setmdattr&-enable=0&-name=2&cmd=setmdattr&-enable=0&-name=3&cmd=setmdattr&-enable=0&-name=4

Download INSTAR_CGI_H264_Chipset_English Guide

Download FI9821W-CGI-Commands

http://community.ispyconnect.com/ispybb2/viewtopic.php?t=1442

/cgi-bin/hi3510/ptzgotopoint.cgi?&-chn=0&-point=0

      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0&-act=left&-speed=10
      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0&-act=upleft&-speed=10
      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0&-act=right&-speed=10
      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0&-act=upright&-speed=10
      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0?&-act=up&-speed=10
      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0&-act=down&-speed=10
      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0&-act=downleft&-speed=10
      /cgi-bin/hi3510/ptzctrl.cgi?&-chn=0&-act=downright&-speed=10
      /cgi-bin/hi3510/ptzstop.cgi?&-chn=0&-speed=0
 
 
 
 
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=0
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=1
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=2
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=3
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=4
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=5
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=6
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=7
      <command />/cgi-bin/hi3510/ptzgotopoint.cgi?&amp;-chn=0&amp;-point=8
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=1
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=2
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=3
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=4
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=5
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=6
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=7
      <command />/cgi-bin/hi3510/ptzsetpoint.cgi?&amp;-chn=0&amp;-point=8
      <command />/cgi-bin/hi3510/ptzstarttour.cgi?&amp;-tour=0
      <command />/cgi-bin/hi3510/ptzstarttour.cgi?&amp;-tour=1
      <command />/cgi-bin/hi3510/ptzstarttour.cgi?&amp;-tour=2
      <command />/cgi-bin/hi3510/ptzstarttour.cgi?&amp;-tour=3
      <command />/cgi-bin/hi3510/ptzctrl.cgi?&amp;-step=0&amp;-speed=10&amp;-act=hscan
      <command />/cgi-bin/hi3510/ptzctrl.cgi?&amp;-step=0&amp;-speed=10&amp;-a

You must be logged in to post a comment.